Vanasche Motorsports Stand Bypass Dongle 701 Husqvarna & KTM390,690,1090,1190,1290

The standard stand switch installed by KTM/Husqvarna is a safety device designed to ensure stand is up before you ride away. The switches fail and leave riders stranded in far from home. This dongle is designed to bypass the failed switch, by simply plugging it into the stand switch plug. This dongle can be carried as it is only slightly larger than a 20 cent piece. Easy install is stand switch fails just plug it in, and make sure the stand is up.

DONGLE A - Fitment: REPLACES KTM PART NUMBER: 60411045000

• EU Model 2017-2020 Husqvarna 701 - Enduro & SMC & Vitpilen
  
• EU Model 2019-2020 KTM 690 - Enduro & SMC
  
• All Models 2016-2019 KTM 690 Duke
• All Models KTM 1090 - All years
• KTM 1290 Super Adventure - 2015-2020
• KTM 1290 Duke - 2017-2019

DONGLE B - Fitment: REPLACES KTM PART NUMBER: 61011045000

• EU Model 2021-2026 Husqvarna 701 - Enduro & SMC
• EU Model 2021-2026 KTM 690 - Enduro & SMC
• EU Model GasGas 700 - Enduro & SMC
• All Models 2008-2018 KTM 690 Enduro & SMC 
• All Models 2016 Husqvarna 701 - Enduro & SMC
• All Models 2021-2024 KTM 1290
• All Models KTM 690 Duke – 2008-2015
• KTM 1290 Super Adventure - 2021-2024
• KTM 1290 Duke 2014-2016 AND 2020-2022

These dongles replace the factory sensor. You can locate your sidestand sensor behind the sidestand pivot point. Trace the wire from sensor upward until you get to the connector (typically located around throttle body area). With ignition off, unplug the sensor and plug in the correct dongle. 

Disclaimer

It is the owners responsibility to ensure that the stand is in the up position before riding away when the dongle is in use. This component is not designed to be permanently installed as it bypasses a safety device.